www.bhdu.cn-夜肉伦伦影院无码 ,国产精品www夜色视频,3d动漫精品啪啪一区二区免费,久久婷婷综合缴情亚洲狠狠

Required
必備資質
1. Must have the right to work in China; does not require sponsorship for employment visa currently and in the future.
必須持有在中國工作的許可; 目前和將來都不需要公司為工作簽證提供贊助。
2. With 10 years of working experience in NDT/NDI, or associate degree in engineering or science with 8 years’ work experience, or Bachelor’s degree in engineering or science with no less than 5 years’ work experience.
具備10年NDT/NDI工作經驗，或工程/理科的大專學歷加上8年相關工作經驗，或工程/理科學士學位加上不少于5年的相關工作經驗。
3. Documented qualifications for NDT Level 3 that meet the requirements of NAS 410 or equivalent.
符合NAS 410或同等要求的NDT 3級資質文件。
4. NDT/NDE/NDI certifications as a level 3 Technician per NAS 410 or equivalent in Ultrasonic, Dye Penetrant, Eddy Current, or Composite Bond Testing.
NDT/NDE/NDI認證，根據NAS 410或同等水平的超聲、染料滲透、渦流或復合粘結測試，獲得3級技術員認證。
5. Must be able to pass the vision examination – near vision and color perception.
必須通過視力測試（近距離視覺和顏色感知）。
6. Preferred candidates with two years or more of experience in Responsible level 3 responsibilities.
有兩年或以上的責任三級經驗優選。
7. Have experience to accept FAA/CAAC/EASA audit.
有接受FAA/CAAC/EASA審核的經驗。
Job Responsibilities
崗位職責
1. Perform setup for specialized non-destructive test or measurement equipment.
安裝專門的無損檢測或測量設備。
2. Perform tests or examinations and collects data.
執行測試或檢查并收集數據。
3. Responsible for non-destructive testing and acceptance of repairs to company products.
負責公司產品的無損檢測和維修驗收。
4. Conduct certification preparation training.
進行認證準備培訓。
5. Analyze data and assist with nonconformance resolutions.
分析數據并協助解決不符合項的問題。
6. Document and communicate test, analysis, or measurement results through entries in quality records or test reports.
通過質量記錄或測試報告記錄和溝通測試、分析或測量結果。
7. Provide feedback on adverse trends for process control and process improvement.
為工藝控制和工藝改進提供不良趨勢的反饋。
8. Develop procedures and technique sheets for setting up and calibrating existing test equipment.
為建立和校準現有測試設備制定程序和技術表。
9. Assist with developing procedures for setup and standardization of new or innovative tests.
協助新的或創新測試的流程建立和標準化程序。
10. Perform wide range of tests or examinations and collects data for routine and non-routine work.
執行廣泛的測試或檢查，收集日常和非日常工作的數據。
11. Develop and approve the Written Practice for the Qualification and Certification of NDT Personnel according to the related standards.
根據相關標準制定并批準《無損檢測人員資格和認證書面規程》。
12. Interpret or approve rules, standards, specifications, and other contractual documents that control the NDT methods as used by the employer, make sure the conduction of NDT standards in the company.
解釋或批準控制雇主使用的無損檢測方法的規則、標準、規范和其他合同文件，確保無損檢測標準在公司的實施。
13. Overall administration of the NDT personnel training, qualification, and certification.
無損檢測人員培訓、資格和認證的全面管理。
14. In charge of the suspension, revocation and reinstatement of NDT personnel qualification, certification, and authorization. 負責無損檢測人員資格、認證和授權的暫停、撤銷和恢復。
15. In charge of annual proficiency review of the NDT personnel. 負責無損檢測人員的年度能力審查。
16. Be responsible for the NDT technology, select the method and technique for a specific inspection.
負責無損檢測技術，選擇特定檢查的方法和技術。
17. Approve NDT equipment and tooling used, determining of necessary consumables, meet the requirement of process and new development.
準使用的無損檢測設備和工具，確定必要的耗材，滿足工藝和新開發的要求。
18. Auditing outside vendor or agencies, make sure the related inspection meets the requirements of our company.
審核外部供應商或機構，確保相關檢查符合我們公司的要求。
19. Prepare and verify the adequacy of procedures and work instructions, publish universally accessible as valid technical instruction. Approve NDT procedures and work instructions for technical adequacy.
準備并驗證程序和工作說明的充分性，將其作為有效的技術說明公之于眾。批準無損檢測程序和工作說明，以確保技術充分性。
20. Accept other tasks arranged by Manager as business needed (such as Material receiving, tool calibration management). 根據需要接受領導安排的其他任務（如：航材驗收，校驗工具管理）。